New Barrier Radar Sensor Vehicle Detector with Anti-Hitting and Trigger Function 5%off

• Customization: Available
• Sensor Type: Radar Sensor
• Input Voltage: DC9-24V 200mA
• Model NO.: IDL-VBR10
• Working Frequency: 24GHz
• Modulation Mode: Fmcw
• Detection Distance: 1 to 6 Meters
• Human Detection Width: About 1.5 Meters (Center Area)
• Working Temperature: -40 to 85 Degree
• Protection Level: IP67
• Type: Parking Sensor
• Working Mode: Car Ride
• Driving: Positive Operation
• Falling Prevention Device: Pull-Type
• The Vehicle Inlet and Outlet: Center
• Design: Double Post
• Certification: CE
• Voltage: DC 12V
• Transport Package: Standard Neutral Package or Customers Requirement
• Specification: CE, UKCA, RoSH
• Trademark: IDL
• Origin: China
• HS Code: 847190
• Production Capacity: 10000 Set / Month
• Package Size: 18.00cm * 12.00cm * 5.00cm
• Package Gross Weight: 0.500kg

Product Description

1. Are you still troubled to install loop detector and loops?

   1) Cutting ground-Waste time and not good looking;

   2) Complex wiring-Messy and Difficult;

   3) Mud road-Cannot fix the loop;

   4) Cannot detect big truck, trailer or other vehicles with high-bed.

 

2. Why not choose barrier radar detector?

   1) Can replace loop detector completely; no wiring layout, save time and cost.

   2) Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.

   3) Work in range of 24-24.5Ghz without effects from any climatic environment.

   4) Can effectively distinguish vehicles and humans to avoid any hitting.

   5) Can be used for trigger detection, e.g. trigger camera to capture the picture.

   6) Can be used to trigger the alarm in the warning zone.

   7) Can record the traffic and no data is lost when power is off.

 

3. Radar Detector Installation

   1) The trigger radar and the anti-smash radar should be installed perpendicular to the lane's direction. The anti-smash radar is installed on the       cabinet below the barrier pole. The trigger radar is installed on the special bracket for the radar installation. The optimal height from the ground to the radar center is 0.6 meters.

   2) The barrier's cabinet must be fixed firmly to avoid shaking when the barrier is working.

   3) Within the detection area, there should be no obstacles other than the barrier pole, e.g. traffic cones, isolation bars, signs, etc..

   4) Please update the radar background in time after the environment in the detecting area is changed.

                                    

 ( The above picture's ratio is 10:1. The lane width is 3 meters and the trigger distance is 4 meters)

   5) Anti-smash Radar Detector Installation Diagram 

                                           
 

4. Wiring Definition

Color	Definition
Red	Power Input +12VDC
Black	Power Input GND
Blue	RS485+
Green	RS485-
Purple	Function Switch Input
Brown	Function Switch Input Ground
White	Relay Output NO
Yellow	Relay Output COM

5. CE, UKCA and RoSH Certificate


6. Project for Reference