Digital Display Traffic Detector/Safety Sensor/Radar Detector to Open and Close Barrier Gate

• Customization: Available
• Type: Sensor
• Usage: Anti-Hitting and Trigger
• Model NO.: IDL-VBR10
• Installation Mode: Mounted on Barrier Gate or Pole
• Certification: CE, Rosh, Ukca
• Application: Home, Industry, Communication Electronic Products, Special Equipment, Car/Motorcycle, Traffic
• Name: Best Barrier Radar Sensor Radar Detector
• Input Voltage: 12VDC
• Rated Current: 250mA
• Working Frequency: 24-24.25GHz
• Detection Distance: 0.5 to 6 Meters, ±0.1 Meters
• Working Temperature: -40ºC~+85ºC
• Transport Package: Standard Neutral Package or Customers Requirement
• Specification: 127*97*26mm
• Origin: China
• HS Code: 847190
• Production Capacity: 10000 Set / Month
• Package Size: 127.00cm * 97.00cm * 26.00cm
• Package Gross Weight: 0.500kg

Product Description

Product Description

<sup>The vehicle detector adopts 24GHz monolithic transceiver chip from Germany and multi-layer composite PCB antenna. Due to its high integration, high bandwidth and low noise, its working spectrum and measurement accuracy are stable and it can be used for barrier with straight arm to avoid any hitting.

Application:
   1) Regional detection and triggering in various climate environments.
   2) Trigger and anti-smash applications for all barriers gates</sup>

Product Parameters

^{1) Input Voltage: 12VDC
2) Rated Current: 250mA
3) Working Frequency: 24-24.25GHz
4) Modulation Mode: FMCW
5) X-axis Antenna Transmission Power: 10-15dBm
6) X-axis Horizontal Beam: 35±5°
7) X-axis Vertical Beam: 15±3°
8) Y-axis Antenna Transmission Power: 10-15dBm
9) Y-axis Horizontal Beam: 15±3°
10) Y-axis Vertical Beam: 35±5°
11) Detection Distance: 0.5 to 6 meters, ±0.1 meters
12) Working Temperature: -40ºC~+85ºC
13) Dimension: 127*97*26mm}

Why choose our radar detector?

^{Are you still troubled to install loop detector and loops?}

• ^{Cutting ground--Waste time and not good looking;}
• ^{Complex wiring--Messy and Difficult;}
• ^{Mud road--Cannot fix the loop;}
• ^{Cannot detect big truck, trailer or other vehicles with high-bed.}

^{Why choose barrier radar detector?}

• ^{Can replace loop detector completely; no wiring layout, save time and cost.}
• ^{Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.}
• ^{Work in range of 24-24.5Ghz without effects from any climatic environment.}
• ^{Can effectively distinguish vehicles and humans to avoid any hitting.}
• ^{Can be used for trigger detection, e.g. trigger camera to capture the picture.}
• ^{Can be used to trigger the alarm in the warning zone.}
• ^{Can record the traffic and no data is lost when power is off.}

Certifications

 

Installation Instructions

^{Radar Detector Installation}

   ^{1) The trigger radar and the anti-smash radar should be installed perpendicular to the lane's direction. The anti-smash radar is installed on the cabinet below the barrier pole. The trigger radar is installed on the special bracket for the radar installation. The optimal height from the ground to the radar center is 0.6 meters.}

   ^{2) The barrier's cabinet must be fixed firmly to avoid shaking when the barrier is working.}

   ^{3) Within the detection area, there should be no obstacles other than the barrier pole, e.g. traffic cones, isolation bars, signs, etc..}

   ^{4) Please update the radar background in time after the environment in the detecting area is changed.}

 ^{( The above picture's ratio is 10:1. The lane width is 3 meters and the trigger distance is 4 meters)}

   ^{5) Anti-smash Radar Detector Installation Diagram} 

Wiring Definition

 

^Color	^Definition
^Red	^Power Input +12VDC
^Black	^Power Input GND
^Blue	^RS485+
^Green	^RS485-
^Grey	^Function Switch Input
^Brown	^Function Switch Input Ground
^White	^Relay Output NO
^Yellow	^Relay Output COM

 

More Applications